Complete JEE Main Guide: Eligibility, Syllabus, Pattern, Preparation Tips | ApplyAnywhere

Complete JEE Main Examination Guide

Your comprehensive resource for Joint Entrance Examination (JEE) Main – covering eligibility, exam pattern, syllabus, preparation strategies, recommended books, and expert form filling assistance services.

10+ Lakhs

Aspirants appear each year

3 Hours

Exam duration for each attempt

3 Subjects

Physics, Chemistry, and Mathematics

2 Attempts

Per year for improved scores

JEE Main Overview

The Joint Entrance Examination (JEE) Main is the national level undergraduate engineering entrance exam in India. It serves as the first stage for admission to prestigious engineering institutes like NITs, IIITs, and other centrally funded technical institutions. It’s also the qualifying exam for JEE Advanced, which is the gateway to IITs.

JEE Main Exam

Exam Conducting Body

National Testing Agency (NTA)

JEE Main is conducted by the National Testing Agency (NTA), an independent autonomous and self-sustained premier testing organization established to conduct efficient and transparent standardized tests.

Official Website
Engineering Colleges

Participating Institutes

NITs, IIITs, GFTIs

JEE Main score is used for admission to 31 National Institutes of Technology (NITs), 25 Indian Institutes of Information Technology (IIITs), and 28 other Government Funded Technical Institutes (GFTIs).

Institute List
Exam Pattern

Exam Frequency

Twice a year

JEE Main is conducted twice a year, typically in January and April. Candidates can appear in both attempts, and the best of the two scores is considered for rank preparation.

View Exam Pattern

Eligibility Criteria

To appear for JEE Main, candidates must meet certain eligibility criteria related to age, educational qualification, and number of attempts.

Age Criteria
Educational Qualification
Number of Attempts
Subject Requirements

Age Criteria for JEE Main

No Upper Age Limit

There is no upper age limit for appearing in JEE Main. Candidates who have passed class 12th/equivalent examination in the current year or previous years are eligible.

Year of Qualification

Candidates should have passed their Class 12th/equivalent exam in the current year or the year before. There’s no restriction on the number of attempts.

Note: For admission to IITs, candidates must have been born on or after October 1, with some relaxations for reserved categories. However, this restriction applies only for JEE Advanced, not JEE Main.

Educational Qualification

Class 12th or Equivalent

Candidates must have passed the 10+2/equivalent examination from a recognized board with Physics, Chemistry, and Mathematics as compulsory subjects.

Minimum Percentage

General category candidates need at least 75% marks in Class 12th or be in the top 20 percentile of their respective boards. For SC/ST candidates, the requirement is 65%.

Appearing Candidates

Candidates who are appearing for their Class 12th/equivalent examination in the current academic year are also eligible to apply for JEE Main.

Number of Attempts

No Restriction on Attempts

There is no limit on the number of attempts for JEE Main. A candidate can appear in the exam for consecutive years until they meet the age criteria for JEE Advanced (if aiming for IITs).

Twice a Year

Candidates can attempt JEE Main twice a year (January and April sessions). The best of the two scores will be considered for preparing the ranks.

Important: While there’s no limit for JEE Main, for JEE Advanced, a candidate can attempt only twice in consecutive years.

Subject Requirements

Compulsory Subjects

Physics, Chemistry, and Mathematics are mandatory subjects in the qualifying examination (10+2 or equivalent).

Other Subjects

Apart from PCM, candidates must have a passing grade in a language subject (any) and any other additional subject as prescribed by their respective boards.

Recognized Boards

The qualifying examination should be from any recognized board like CBSE, ICSE, state boards, or any equivalent examination recognized by the Indian government.

JEE Main Exam Pattern

Understanding the exam pattern is crucial for effective preparation. JEE Main is conducted in multiple sessions with specific patterns for different papers.

B.Tech Pattern
B.Arch Pattern
B.Planning Pattern
Marking Scheme

B.Tech (Paper 1) Exam Pattern

Exam Details

Mode of Examination: Computer Based Test (CBT)

Duration: 3 hours (180 minutes)

Total Questions: 90 (30 from each subject)

Question Type: Multiple Choice Questions (MCQs) and Numerical Value Questions

Medium: English, Hindi, and other regional languages

Subject Number of Questions Marks per Question Total Marks
Physics 30 (20 MCQs + 10 Numerical) 4 100
Chemistry 30 (20 MCQs + 10 Numerical) 4 100
Mathematics 30 (20 MCQs + 10 Numerical) 4 100
Total 90 300

Marking Scheme

Marking Details

Correct Answer: +4 marks

Incorrect Answer (MCQ): -1 mark

Incorrect Answer (Numerical): 0 marks (No negative marking)

Unattempted Question: 0 marks

Multiple Answers: Treated as incorrect answer (negative marking applies)

Strategy Tip: Since numerical questions have no negative marking, it’s advisable to attempt them even if you’re not completely sure. For MCQs, attempt only when you’re reasonably confident to avoid negative marking.

B.Arch (Paper 2A) Exam Pattern

Exam Details

Mode of Examination: Mathematics and Aptitude – Computer Based Test; Drawing – Pen and Paper

Duration: 3 hours (180 minutes)

Total Questions: 82

Question Type: Multiple Choice Questions and Drawing

Medium: English, Hindi, and other regional languages

Part Subject Number of Questions Marks
Part I Mathematics 30 (20 MCQs + 10 Numerical) 100
Part II Aptitude Test 50 200
Part III Drawing Test 2 100
Total 82 400

B.Planning (Paper 2B) Exam Pattern

Exam Details

Mode of Examination: Computer Based Test

Duration: 3 hours (180 minutes)

Total Questions: 105

Question Type: Multiple Choice Questions

Medium: English, Hindi, and other regional languages

Part Subject Number of Questions Marks
Part I Mathematics 30 (20 MCQs + 10 Numerical) 100
Part II Aptitude Test 50 200
Part III Planning-Based Questions 25 100
Total 105 400

JEE Main Syllabus

The JEE Main syllabus is based on the topics covered in Class 11 and Class 12 of CBSE, ICSE, and various state boards. Here’s a detailed subject-wise breakdown:

Physics
Chemistry
Mathematics
Aptitude (B.Arch)

Physics Syllabus

Physics and Measurement

Physics, technology and society, SI units, Fundamental and derived units, Least count, accuracy and precision of measuring instruments, Errors in measurement, Dimensions of physical quantities, dimensional analysis and its applications.

Kinematics

Frame of reference, Motion in a straight line: Position-time graph, speed and velocity; Uniform and non-uniform motion, average speed and instantaneous velocity, Uniformly accelerated motion, velocity-time and position-time graphs, Relations for uniformly accelerated motion; Scalars and Vectors, Vector addition and subtraction, Zero vector, Scalar and Vector products, Unit Vector, Resolution of a Vector; Relative Velocity, Motion in a plane, Projectile Motion, Uniform Circular Motion.

Laws of Motion

Force and Inertia, Newton’s First Law of motion; Momentum, Newton’s Second Law of motion; Impulse, Newton’s Third Law of motion; Law of conservation of linear momentum and its applications, Equilibrium of concurrent forces; Static and Kinetic friction, laws of friction, rolling friction; Dynamics of uniform circular motion: Centripetal force and its applications.

Work, Energy and Power

Work done by a constant force and a variable force; Kinetic and potential energies, work-energy theorem, power; Potential energy of a spring, conservation of mechanical energy, conservative and non-conservative forces; Elastic and inelastic collisions in one and two dimensions.

Rotational Motion

Centre of mass of a two-particle system, Centre of mass of a rigid body; Basic concepts of rotational motion; moment of a force, torque, angular momentum, conservation of angular momentum and its applications; Moment of inertia, radius of gyration, Values of moments of inertia for simple geometrical objects, Parallel and perpendicular axes theorems and their applications; Rigid body rotation, equations of rotational motion.

Gravitation

The universal law of gravitation, Acceleration due to gravity and its variation with altitude and depth; Kepler’s laws of planetary motion, Gravitational potential energy; gravitational potential, Escape velocity, Orbital velocity of a satellite, Geostationary satellites.

Properties of Solids and Liquids

Elastic behavior, Stress-strain relationship, Hooke’s law, Young’s modulus, bulk modulus, modulus of rigidity; Pressure due to a fluid column; Pascal’s law and its applications; Viscosity, Stokes’ law, terminal velocity, streamline and turbulent flow, Reynolds number; Bernoulli’s principle and its applications; Surface energy and surface tension, angle of contact, application of surface tension – drops, bubbles and capillary rise; Heat, temperature, thermal expansion; specific heat capacity, calorimetry; change of state, latent heat; Heat transfer-conduction, convection and radiation, Newton’s law of cooling.

Thermodynamics

Thermal equilibrium, zeroth law of thermodynamics, concept of temperature; Heat, work and internal energy; First law of thermodynamics; Second law of thermodynamics: reversible and irreversible processes, Carnot engine and its efficiency.

Kinetic Theory of Gases

Equation of state of a perfect gas, work done on compressing a gas; Kinetic theory of gases – assumptions, concept of pressure, Kinetic energy and temperature; RMS speed of gas molecules; Degrees of freedom, Law of equipartition of energy, applications to specific heat capacities of gases; Mean free path, Avogadro’s number.

Oscillations and Waves

Oscillations: Periodic motion – period, frequency, displacement as a function of time, Periodic functions; Simple harmonic motion (S.H.M) and its equation; phase; oscillations of a spring -restoring force and force constant; energy in S.H.M. – Kinetic and potential energies; Simple pendulum – derivation of expression for its time period; Free, forced and damped oscillations, resonance.

Waves: Wave motion, Longitudinal and transverse waves, speed of a wave, Displacement relation for a progressive wave, Principle of superposition of waves, reflection of waves, Standing waves in strings and organ pipes, fundamental mode and harmonics, Beats, Doppler effect in sound.

Electrostatics

Electric charges and their conservation, Coulomb’s law – force between two point charges, forces between multiple charges; superposition principle and continuous charge distribution; Electric field, electric field due to a point charge, electric field lines, electric dipole, electric field due to a dipole, torque on a dipole in uniform electric field; Electric flux, Gauss’s law and its applications to find field due to infinitely long straight wire, uniformly charged infinite plane sheet and uniformly charged thin spherical shell; Electric potential, potential difference, electric potential due to a point charge, a dipole and system of charges; equipotential surfaces, electrical potential energy of a system of two point charges and of electric dipole in an electrostatic field; Conductors and insulators, free charges and bound charges inside a conductor, Dielectrics and electric polarization, capacitors and capacitance, combination of capacitors in series and in parallel, capacitance of a parallel plate capacitor with and without dielectric medium between the plates, Energy stored in a capacitor.

Current Electricity

Electric current, Drift velocity, mobility and their relation with electric current; Ohm’s law, Electrical resistance, V-I characteristics (linear and non-linear), Electrical energy and power, Electrical resistivity and conductivity; Carbon resistors, colour code for carbon resistors; Series and parallel combinations of resistors; Temperature dependence of resistance; Internal resistance of a cell, potential difference and emf of a cell, combination of cells in series and in parallel; Kirchhoff’s laws and simple applications; Wheatstone bridge, metre bridge; Potentiometer – principle and its applications to measure potential difference and for comparing emf of two cells; measurement of internal resistance of a cell.

Magnetic Effects of Current and Magnetism

Concept of magnetic field, Oersted’s experiment; Biot – Savart law and its application to current carrying circular loop; Ampere’s law and its applications to infinitely long straight wire, straight and toroidal solenoids; Force on a moving charge in uniform magnetic and electric fields; Cyclotron; Force on a current-carrying conductor in a uniform magnetic field; Force between two parallel current-carrying conductors – definition of ampere; Torque experienced by a current loop in uniform magnetic field; Moving coil galvanometer – its current sensitivity and conversion to ammeter and voltmeter.

Current loop as a magnetic dipole and its magnetic dipole moment; Magnetic dipole moment of a revolving electron; Magnetic field intensity due to a magnetic dipole (bar magnet) along its axis and perpendicular to its axis; Torque on a magnetic dipole (bar magnet) in a uniform magnetic field; Bar magnet as an equivalent solenoid, magnetic field lines; Earth’s magnetic field and magnetic elements; Para-, dia- and ferro- magnetic substances with examples; Electromagnets and factors affecting their strengths; Permanent magnets.

Electromagnetic Induction and Alternating Currents

Electromagnetic induction; Faraday’s law, induced emf and current; Lenz’s Law, Eddy currents; Self and mutual inductance; Alternating currents, peak and RMS value of alternating current/voltage; reactance and impedance; LC oscillations (qualitative treatment only), LCR series circuit, resonance; Power in AC circuits, wattless current; AC generator and transformer.

Electromagnetic Waves

Electromagnetic waves and their characteristics (qualitative ideas only); Transverse nature of electromagnetic waves; Electromagnetic spectrum (radio waves, microwaves, infrared, visible, ultraviolet, X-rays, gamma rays) including elementary facts about their uses.

Optics

Reflection of light, spherical mirrors, mirror formula; Refraction of light, total internal reflection and its applications, optical fibres, refraction at spherical surfaces, lenses, thin lens formula, lensmaker’s formula; Magnification, power of a lens, combination of thin lenses in contact, combination of a lens and a mirror; Refraction and dispersion of light through a prism; Scattering of light – blue colour of the sky and reddish appearance of the sun at sunrise and sunset.

Optical instruments: Human eye, image formation and accommodation, correction of eye defects (myopia, hypermetropia, presbyopia and astigmatism) using lenses; Microscopes and astronomical telescopes (reflecting and refracting) and their magnifying powers.

Wave optics: Wavefront and Huygens’ principle, reflection and refraction of plane wave at a plane surface using wavefronts; Proof of laws of reflection and refraction using Huygens’ principle; Interference, Young’s double slit experiment and expression for fringe width, coherent sources and sustained interference of light; Diffraction due to a single slit, width of central maximum; Resolving power of microscopes and astronomical telescopes; Polarization, plane polarized light, Brewster’s law, uses of plane polarized light and Polaroids.

Dual Nature of Matter and Radiation

Dual nature of radiation; Photoelectric effect, Hertz and Lenard’s observations; Einstein’s photoelectric equation – particle nature of light; Matter waves – wave nature of particles, de Broglie relation; Davisson-Germer experiment (experimental details should be omitted; only conclusion should be explained).

Atoms and Nuclei

Alpha-particle scattering experiment; Rutherford’s model of atom; Bohr model, energy levels, hydrogen spectrum; Composition and size of nucleus, atomic masses, isotopes, isobars; isotones; Radioactivity – alpha, beta and gamma particles/rays and their properties; radioactive decay law; Mass-energy relation, mass defect; binding energy per nucleon and its variation with mass number; nuclear fission and fusion.

Electronic Devices

Energy bands in solids (qualitative ideas only), conductor, insulator and semiconductor; semiconductor diode – I-V characteristics in forward and reverse bias, diode as a rectifier; I-V characteristics of LED, photodiode, solar cell, and Zener diode; Zener diode as a voltage regulator; Junction transistor, transistor action, characteristics of a transistor; transistor as an amplifier (common emitter configuration) and oscillator; Logic gates (OR, AND, NOT, NAND and NOR); Transistor as a switch.

Communication Systems

Elements of a communication system (block diagram only); bandwidth of signals (speech, TV and digital); bandwidth of transmission medium; propagation of electromagnetic waves in the atmosphere, sky and space wave propagation; need for modulation; production and detection of an amplitude-modulated wave.

Chemistry Syllabus

Physical Chemistry
Inorganic Chemistry
Organic Chemistry

Physical Chemistry

Some Basic Concepts in Chemistry

Matter and its nature, Dalton’s atomic theory; Concept of atom, molecule, element and compound; Physical quantities and their measurements in Chemistry, precision and accuracy, significant figures, S.I. Units, dimensional analysis; Laws of chemical combination; Atomic and molecular masses, mole concept, molar mass, percentage composition, empirical and molecular formulae; Chemical equations and stoichiometry.

States of Matter

Classification of matter into solid, liquid and gaseous states.

Gaseous State: Measurable properties of gases; Gas laws – Boyle’s law, Charle’s law, Graham’s law of diffusion, Avogadro’s law, Dalton’s law of partial pressure; Concept of Absolute scale of temperature; Ideal gas equation; Kinetic theory of gases (only postulates); Concept of average, root mean square and most probable velocities; Real gases, deviation from Ideal behavior, compressibility factor and van der Waals equation.

Liquid State: Properties of liquids – vapour pressure, viscosity and surface tension and effect of temperature on them (qualitative treatment only).

Solid State: Classification of solids: molecular, ionic, covalent and metallic solids, amorphous and crystalline solids (elementary idea); Bragg’s Law and its applications; Unit cell and lattices, packing in solids (fcc, bcc and hcp lattices), voids, calculations involving unit cell parameters, imperfection in solids; Electrical, magnetic and dielectric properties.

Atomic Structure

Discovery of sub-atomic particles (electron, proton and neutron); Thomson and Rutherford atomic models and their limitations; Nature of electromagnetic radiation, photoelectric effect; Spectrum of hydrogen atom, Bohr model of hydrogen atom – its postulates, derivation of the relations for energy of the electron and radii of the different orbits, limitations of Bohr’s model; Dual nature of matter, de Broglie’s relationship, Heisenberg uncertainty principle; Elementary ideas of quantum mechanics, quantum mechanical model of atom, its important features, concept of atomic orbitals as one electron wave functions; Variation of Ψ and Ψ2 with r for 1s and 2s orbitals; various quantum numbers (principal, angular momentum and magnetic quantum numbers) and their significance; Shapes of s, p and d – orbitals, electron spin and spin quantum number; Rules for filling electrons in orbitals – Aufbau principle, Pauli’s exclusion principle and Hund’s rule, electronic configuration of elements, extra stability of half-filled and completely filled orbitals.

Chemical Bonding and Molecular Structure

Kossel – Lewis approach to chemical bond formation, concept of ionic and covalent bonds; Ionic Bonding: Formation of ionic bonds, factors affecting the formation of ionic bonds; calculation of lattice enthalpy; Covalent Bonding: Concept of electronegativity, Fajan’s rule, dipole moment; Valence Shell Electron Pair Repulsion (VSEPR) theory and shapes of simple molecules; Quantum mechanical approach to covalent bonding: Valence bond theory – Its important features, concept of hybridization involving s, p and d orbitals; Resonance; Molecular orbital theory – Its important features, LCAOs, types of molecular orbitals (bonding, antibonding), sigma and pi-bonds, molecular orbital electronic configurations of homonuclear diatomic molecules, concept of bond order, bond length and bond energy; Elementary idea of metallic bonding; Hydrogen bonding and its applications.

Chemical Thermodynamics

Fundamentals of thermodynamics: System and surroundings, extensive and intensive properties, state functions, types of processes; First law of thermodynamics – Concept of work, heat, internal energy and enthalpy, heat capacity, molar heat capacity; Hess’s law of constant heat summation; Enthalpies of bond dissociation, combustion, formation, atomization, sublimation, phase transition, hydration, ionization and solution; Second law of thermodynamics – Spontaneity of processes; ΔS of the universe and ΔG of the system as criteria for spontaneity, ΔG° (Standard Gibbs energy change) and equilibrium constant.

Solutions

Different methods for expressing concentration of solution – molality, molarity, mole fraction, percentage (by volume and mass both), vapour pressure of solutions and Raoult’s Law – Ideal and non-ideal solutions, vapour pressure – composition, plots for ideal and non-ideal solutions; Colligative properties of dilute solutions – relative lowering of vapour pressure, depression of freezing point, elevation of boiling point and osmotic pressure; Determination of molecular mass using colligative properties; Abnormal value of molar mass, van’t Hoff factor and its significance.

Equilibrium

Meaning of equilibrium, concept of dynamic equilibrium; Equilibria involving physical processes: Solid -liquid, liquid – gas and solid – gas equilibria, Henry’s law, general characterics of equilibrium involving physical processes; Equilibria involving chemical processes: Law of chemical equilibrium, equilibrium constants (Kp and Kc) and their significance, significance of ΔG and ΔG° in chemical equilibria, factors affecting equilibrium concentration, pressure, temperature, effect of catalyst; Le Chatelier’s principle; Ionic equilibrium: Weak and strong electrolytes, ionization of electrolytes, various concepts of acids and bases (Arrhenius, Brönsted – Lowry and Lewis) and their ionization, acid – base equilibria (including multistage ionization) and ionization constants, ionization of water, pH scale, common ion effect, hydrolysis of salts and pH of their solutions, solubility of sparingly soluble salts and solubility products, buffer solutions.

Redox Reactions and Electrochemistry

Electronic concepts of oxidation and reduction, redox reactions, oxidation number, rules for assigning oxidation number, balancing of redox reactions; Electrolytic and metallic conduction, conductance in electrolytic solutions, specific and molar conductivities and their variation with concentration: Kohlrausch’s law and its applications; Electrochemical cells – Electrolytic and Galvanic cells, different types of electrodes, electrode potentials including standard electrode potential, half – cell and cell reactions, emf of a Galvanic cell and its measurement; Nernst equation and its applications; Relationship between cell potential and Gibbs energy change; Dry cell and lead accumulator; Fuel cells; Corrosion and its prevention.

Chemical Kinetics

Rate of a chemical reaction, factors affecting the rate of reactions: concentration, temperature, pressure and catalyst; elementary and complex reactions, order and molecularity of reactions, rate law, rate constant and its units, differential and integral forms of zero and first order reactions, their characteristics and half – lives, effect of temperature on rate of reactions – Arrhenius theory, activation energy and its calculation, collision theory of bimolecular gaseous reactions (no derivation).

Surface Chemistry

Adsorption – Physisorption and chemisorption and their characteristics, factors affecting adsorption of gases on solids – Freundlich and Langmuir adsorption isotherms, adsorption from solutions; Catalysis – Homogeneous and heterogeneous, activity and selectivity of solid catalysts, enzyme catalysis and its mechanism; Colloidal state – distinction among true solutions, colloids and suspensions, classification of colloids – lyophilic, lyophobic; multimolecular, macromolecular and associated colloids (micelles), preparation and properties of colloids – Tyndall effect, Brownian movement, electrophoresis, dialysis, coagulation and flocculation; Emulsions and their characteristics.

Inorganic Chemistry

Classification of Elements and Periodicity in Properties

Modem periodic law and present form of the periodic table, s, p, d and f block elements, periodic trends in properties of elements atomic and ionic radii, ionization enthalpy, electron gain enthalpy, valence, oxidation states and chemical reactivity.

General Principles and Processes of Isolation of Metals

Modes of occurrence of elements in nature, minerals, ores; Steps involved in the extraction of metals – concentration, reduction (chemical and electrolytic methods) and refining with special reference to the extraction of Al, Cu, Zn and Fe; Thermodynamic and electrochemical principles involved in the extraction of metals.

Hydrogen

Position of hydrogen in periodic table, isotopes, preparation, properties and uses of hydrogen; hydrides – ionic, covalent and interstitial; physical and chemical properties of water, heavy water; hydrogen peroxide – preparation, reactions, use and structure; hydrogen as a fuel.

s-Block Elements (Alkali and Alkaline Earth Metals)

Group – 1 and 2 Elements: General introduction, electronic configuration, occurrence, anomalous properties of the first element of each group, diagonal relationship, trends in properties variation of properties such as ionization enthalpy, atomic and ionic radii), trends in chemical reactivity with oxygen, water, hydrogen and halogens; uses.

Preparation and properties of some important compounds – Sodium carbonate, sodium chloride, sodium hydroxide and sodium hydrogen carbonate; Biological importance of sodium and potassium; CaO, CaCO3 and industrial use of lime and limestone; Biological importance of Mg and Ca.

p-Block Elements

Group – 13 to Group 18 Elements: General Introduction: Electronic configuration and general trends in physical and chemical properties of elements across the periods and down the groups; unique behaviour of first element in each group.

Groupwise study of the p-block elements:

Group 13: Preparation, properties and uses of boron and aluminium; properties of boric acid, diborane, boron trifluoride, aluminium chloride and alums;

Group 14: Tendency for catenation; allotropic forms of carbon, preparation, properties and uses of carbon monoxide and carbon dioxide; properties of silicon tetrachloride, silicones, silicates and zeolites;

Group 15: Properties and uses of nitrogen and phosphorus; allotropic forms of phosphorus; preparation, properties, uses and structure of ammonia, nitric acid, phosphine and phosphorus halides (PCl3, PCl5); structures of oxides and oxoacids of nitrogen and phosphorus;

Group 16: Preparation, properties, uses and structure of ozone; allotropic forms of sulphur; preparation, properties, uses and structure of sulphur dioxide, sulphuric acid (including its industrial preparation); structures of oxoacids of sulphur;

Group 17: Preparation, properties and uses of chlorine and hydrochloric acid; trends in the acidic nature of hydrogen halides; structures of interhalogen compounds and oxides and oxoacids of chlorine;

Group 18: Occurrence and uses of noble gases; structures of fluorides and oxides of xenon.

d- and f- Block Elements

Transition Elements: General introduction, electronic configuration, occurrence and characteristics, general trends in properties of the first row transition elements – physical properties, ionization enthalpy, oxidation states, atomic radii, colour, catalytic behavior, magnetic properties, complex formation, interstitial compounds, alloy formation; Preparation, properties and uses of K2Cr2O7 and KMnO4.

Inner Transition Elements: Lanthanoids – Electronic configuration, oxidation states, chemical reactivity and lanthanoid contraction and its consequences; Actinoids – Electronic configuration, oxidation states and comparison with lanthanoids.

Coordination Compounds

Introduction to coordination compounds, Werner’s theory; ligands, coordination number, denticity, chelation; IUPAC nomenclature of mononuclear coordination compounds, isomerism; Bonding in coordination compounds – Valence bond theory and basic ideas of Crystal field theory, colour and magnetic properties; Importance of coordination compounds (in qualitative analysis, extraction of metals and biological systems).

Organic Chemistry

Purification and Characterisation of Organic Compounds

Purification – Crystallization, sublimation, distillation, differential extraction and chromatography – principles and their applications; Qualitative analysis – Detection of nitrogen, sulphur, phosphorus and halogens; Quantitative analysis (basic principles only) – Estimation of carbon, hydrogen, nitrogen, halogens, sulphur, phosphorus; Calculations of empirical formulae and molecular formulae; Numerical problems in organic quantitative analysis.

Some Basic Principles of Organic Chemistry

Tetravalency of carbon; Shapes of simple molecules – hybridization (s and p); Classification of organic compounds based on functional groups: – C = C – , – C ≡ C – and those containing halogens, oxygen, nitrogen and sulphur; Homologous series; Isomerism – structural and stereoisomerism; Nucleophiles and electrophiles; Electron displacement in a covalent bond – inductive effect, electromeric effect, resonance and hyperconjugation; Fission of a covalent bond: homolysis and heterolysis; Carbocations, carbanions and free radicals, stability of carbocations and free radicals; Common types of organic reactions – Substitution, addition, elimination and rearrangement.

Hydrocarbons

Classification, isomerism, IUPAC nomenclature, general methods of preparation, properties and reactions.

Alkanes: Conformations: Sawhorse and Newman projections (of ethane); Mechanism of halogenation of alkanes;

Alkenes: Structure of double bond (ethene), geometrical isomerism; Mechanism of electrophilic addition: addition of hydrogen, halogens, water, hydrogen halides (Markownikov’s addition and peroxide effect); Ozonolysis, oxidation, and polymerization;

Alkynes: Structure of triple bond (ethyne);

Aromatic Hydrocarbons: Structure of benzene, resonance and aromaticity; Mechanism of electrophilic substitution: halogenation, nitration, Friedel – Craft’s alkylation and acylation; Directive influence of functional group in mono-substituted benzene.

Organic Compounds Containing Halogens

Haloalkanes: Nomenclature, nature of C – X bond, physical and chemical properties, mechanism of substitution reactions, optical rotation; Haloarenes: Nature of C – X bond, substitution reactions (directive influence of halogen for monosubstituted compounds only); Uses and environmental effects of – dichloromethane, trichloromethane, tetrachloromethane, iodoform, freons, DDT.

Organic Compounds Containing Oxygen

Alcohols: Nomenclature, methods of preparation, physical and chemical properties (of primary alcohols only), identification of primary, secondary and tertiary alcohols, mechanism of dehydration, uses with special reference to methanol and ethanol;

Phenols: Nomenclature, methods of preparation, physical and chemical properties, acidic nature of phenol, electrophilic substitution reactions, uses of phenols;

Ethers: Nomenclature, methods of preparation, physical and chemical properties, uses;

Aldehydes and Ketones: Nomenclature, nature of carbonyl group, methods of preparation, physical and chemical properties, mechanism of nucleophilic addition, reactivity of alpha hydrogen in aldehydes, uses;

Carboxylic Acids: Nomenclature, acidic nature, methods of preparation, physical and chemical properties; uses;

Organic compounds containing nitrogen: Amines: Nomenclature, classification, structure, methods of preparation, physical and chemical properties, uses, identification of primary, secondary and tertiary amines; Cyanides and Isocyanides – will be mentioned at relevant places in context; Diazonium salts: Preparation, chemical reactions and importance in synthetic organic chemistry.

Biomolecules

Carbohydrates: Classification (aldoses and ketoses), monosaccharides (glucose and fructose), D-L configuration, oligosaccharides (sucrose, lactose, maltose), polysaccharides (starch, cellulose, glycogen); Importance of carbohydrates;

Proteins: Elementary idea of – amino acids, peptide bond, polypeptides, proteins, structure of proteins – primary, secondary, tertiary structure and quaternary structures (qualitative idea only), denaturation of proteins; enzymes;

Nucleic Acids: DNA and RNA;

Vitamins: Classification and functions;

Lipids: Classification and structure;

Hormones: Elementary idea (excluding structure).

Polymers

Classification – natural and synthetic, methods of polymerization (addition and condensation), copolymerization; Some important polymers: natural and synthetic like polythene, nylon, polyesters, bakelite, rubber; Biodegradable and non-biodegradable polymers.

Chemistry in Everyday Life

Chemicals in medicines – analgesics, tranquilizers, antiseptics, disinfectants, antimicrobials, antifertility drugs, antibiotics, antacids, antihistamines; Chemicals in food – preservatives, artificial sweetening agents; Cleansing agents – soaps and detergents, cleansing action.

Principles Related to Practical Chemistry

Detection of extra elements (N, S, halogens) in organic compounds; Detection of the following functional groups: hydroxyl (alcoholic and phenolic), carbonyl (aldehyde and ketone), carboxyl and amino groups in organic compounds; Chemistry involved in the preparation of the following: Inorganic compounds: Mohr’s salt, potash alum; Organic compounds: Acetanilide, p-nitroacetanilide, aniline yellow, iodoform; Chemistry involved in the titrimetric exercises – Acids bases and the use of indicators, oxalic-acid vs KMnO4, Mohr’s salt vs KMnO4; Chemical principles involved in the qualitative salt analysis: Cations – Pb2+, Cu2+, Al3+, Fe3+, Zn2+, Ni2+, Ca2+, Ba2+, Mg2+, NH4+; Anions- CO32-, S2-, SO42-, NO3-, NO2-, Cl-, Br-, I- (Insoluble salts excluded); Chemical principles involved in the following experiments: Enthalpy of solution of CuSO4, Enthalpy of neutralization of strong acid and strong base, Preparation of lyophilic and lyophobic sols, Kinetic study of reaction of iodide ion with hydrogen peroxide at room temperature.

Mathematics Syllabus

Sets, Relations and Functions

Sets and their representation; Union, intersection and complement of sets and their algebraic properties; Power set; Relation, Type of relations, equivalence relations, functions; one-one, into and onto functions, composition of functions.

Complex Numbers and Quadratic Equations

Complex numbers as ordered pairs of reals, Representation of complex numbers in the form a+ib and their representation in a plane, Argand diagram, algebra of complex numbers, modulus and argument (or amplitude) of a complex number, square root of a complex number, triangle inequality, Quadratic equations in real and complex number system and their solutions. Relation between roots and coefficients, nature of roots, formation of quadratic equations with given roots.

Matrices and Determinants

Matrices, algebra of matrices, types of matrices, determinants and matrices of order two and three. Properties of determinants, evaluation of determinants, area of triangles using determinants. Adjoint and evaluation of inverse of a square matrix using determinants and elementary transformations, Test of consistency and solution of simultaneous linear equations in two or three variables using determinants and matrices.

Permutations and Combinations

Fundamental principle of counting, permutation as an arrangement and combination as selection, Meaning of P (n,r) and C (n,r), simple applications.

Mathematical Induction

Principle of Mathematical Induction and its simple applications.

Binomial Theorem and its Simple Applications

Binomial theorem for a positive integral index, general term and middle term, properties of Binomial coefficients and simple applications.

Sequences and Series

Arithmetic and Geometric progressions, insertion of arithmetic, geometric means between two given numbers. Relation between A.M. and G.M. Sum upto n terms of special series: ∑n, ∑n2, ∑n3. Arithmetico – Geometric progression.

Limit, Continuity and Differentiability

Real – valued functions, algebra of functions, polynomials, rational, trigonometric, logarithmic and exponential functions, inverse functions. Graphs of simple functions. Limits, continuity and differentiability. Differentiation of the sum, difference, product and quotient of two functions. Differentiation of trigonometric, inverse trigonometric, logarithmic, exponential, composite and implicit functions; derivatives of order upto two. Rolle’s and Lagrange’s Mean Value Theorems. Applications of derivatives: Rate of change of quantities, monotonic – increasing and decreasing functions, Maxima and minima of functions of one variable, tangents and normals.

Integral Calculus

Integral as an anti – derivative. Fundamental integrals involving algebraic, trigonometric, exponential and logarithmic functions. Integration by substitution, by parts and by partial fractions. Integration using trigonometric identities. Evaluation of simple integrals of the type Integral as limit of a sum. Fundamental Theorem of Calculus. Properties of definite integrals. Evaluation of definite integrals, determining areas of the regions bounded by simple curves in standard form.

Differential Equations

Ordinary differential equations, their order and degree. Formation of differential equations. Solution of differential equations by the method of separation of variables, solution of homogeneous and linear differential equations of the type: dy/dx + p(x)y = q(x)

Co-ordinate Geometry

Cartesian system of rectangular co-ordinates in a plane, distance formula, section formula, locus and its equation, translation of axes, slope of a line, parallel and perpendicular lines, intercepts of a line on the coordinate axes.

Straight lines: Various forms of equations of a line, intersection of lines, angles between two lines, conditions for concurrence of three lines, distance of a point from a line, equations of internal and external bisectors of angles between two lines, coordinates of centroid, orthocentre and circumcentre of a triangle, equation of family of lines passing through the point of intersection of two lines.

Circles, conic sections: Standard form of equation of a circle, general form of the equation of a circle, its radius and centre, equation of a circle when the end points of a diameter are given, points of intersection of a line and a circle with the centre at the origin and condition for a line to be tangent to a circle, equation of the tangent. Sections of cones, equations of conic sections (parabola, ellipse and hyperbola) in standard forms, condition for y = mx + c to be a tangent and point (s) of tangency.

Three Dimensional Geometry

Coordinates of a point in space, distance between two points, section formula, direction ratios and direction cosines, angle between two intersecting lines. Skew lines, the shortest distance between them and its equation. Equations of a line and a plane in different forms, intersection of a line and a plane, coplanar lines.

Vector Algebra

Vectors and scalars, addition of vectors, components of a vector in two dimensions and three dimensional space, scalar and vector products, scalar and vector triple product.

Statistics and Probability

Measures of Dispersion: Calculation of mean, median, mode of grouped and ungrouped data. Calculation of standard deviation, variance and mean deviation for grouped and ungrouped data.

Probability: Probability of an event, addition and multiplication theorems of probability, Baye’s theorem, probability distribution of a random variate, Bernoulli trials and Binomial distribution.

Trigonometry

Trigonometrical identities and equations. Trigonometrical functions. Inverse trigonometrical functions and their properties. Heights and Distances.

Mathematical Reasoning

Statements, logical operations and, or, implies, implied by, if and only if. Understanding of tautology, contradiction, converse and contrapositive.

Aptitude Syllabus (For B.Arch)

Awareness of Persons, Places, Buildings, Materials

Objects, textures related to Architecture and build-environment. Visualising three-dimensional objects from two-dimensional drawings. Visualising different sides of three-dimensional objects. Analytical Reasoning Mental Ability (Visual, Numerical and Verbal).

Drawing

Understanding of scale and proportion of objects, geometric composition, shape, building forms and elements, aesthetics, colour texture, harmony and contrast. Conceptualization and Visualization through structuring objects in memory. Drawing of patterns – both geometrical and abstract. Form transformations in 2D and 3D like union, subtraction, rotation, surfaces and volumes. Creating 2D and 3D compositions using given shapes and forms.

JEE Main Preparation Tips

Effective preparation requires a strategic approach, consistent effort, and smart study techniques. Here are comprehensive tips to help you excel in JEE Main.

Understand the Syllabus and Exam Pattern

Thoroughly go through the complete syllabus and understand the exam pattern, marking scheme, and question distribution across topics.

Create a Realistic Study Plan

Develop a structured study schedule that covers all subjects, allocates time for revision, and includes regular breaks to avoid burnout.

Focus on Conceptual Understanding

Avoid rote learning. Instead, focus on understanding fundamental concepts and their applications in problem-solving.

Practice Regularly with Mock Tests

Take regular mock tests under exam conditions to improve speed, accuracy, and time management skills.

Analyze Your Performance

After each test, analyze your performance to identify weak areas, common mistakes, and topics that need more attention.

Revise Systematically

Create concise notes for quick revision. Regularly revise important formulas, concepts, and problem-solving techniques.

Maintain Health and Well-being

Ensure proper sleep, nutrition, and exercise. A healthy body and mind are essential for optimal performance.

Pro Tip: Focus on NCERT books for building strong fundamentals before moving on to advanced reference books. Most questions in JEE Main are concept-based and can be solved with clear understanding of basics.

Recommended Books for JEE Main

Choosing the right study material is crucial for effective preparation. Here are the most recommended books for JEE Main preparation.

Physics
Chemistry
Mathematics
Problem Books

Physics Books

Book Name Author/Publisher Level Key Features
Concepts of Physics H.C. Verma Intermediate Clear concept explanations, good solved examples
Fundamentals of Physics Halliday, Resnick & Walker Intermediate to Advanced Comprehensive coverage, good for building fundamentals
Problems in General Physics I.E. Irodov Advanced Challenging problems, good for practice
Understanding Physics D.C. Pandey Intermediate Good for JEE Main level problems
Physics for JEE Main B.M. Sharma Intermediate Topic-wise practice questions, good for revision

Chemistry Books

Book Name Author/Publisher Level Key Features
NCERT Chemistry Textbooks NCERT Basic Must-read for concepts and theory
Organic Chemistry Morrison & Boyd Intermediate to Advanced Comprehensive coverage of organic chemistry
Concise Inorganic Chemistry J.D. Lee Intermediate to Advanced Excellent for inorganic chemistry
Physical Chemistry O.P. Tandon Intermediate Good for physical chemistry concepts and problems
Modern Approach to Chemical Calculations R.C. Mukherjee Intermediate Excellent for numerical problems in chemistry

Mathematics Books

Book Name Author/Publisher Level Key Features
Mathematics for Class 11 & 12 R.D. Sharma Intermediate Comprehensive coverage with good problems
Objective Mathematics R.D. Sharma Intermediate Good for JEE Main level practice
Plane Trigonometry S.L. Loney Intermediate to Advanced Classic text for trigonometry
Coordinate Geometry S.L. Loney Intermediate to Advanced Comprehensive coverage of coordinate geometry
Algebra Arihant Intermediate Good for algebra concepts and problems

Problem Books & Previous Year Papers

Book Name Author/Publisher Level Key Features
JEE Main Chapter-wise Solved Papers Arihant All Levels Previous year questions with solutions
JEE Main 40+ Year Solved Papers Disha All Levels Comprehensive collection of past papers
JEE Main Practice Papers MTG All Levels Mock test papers for practice
JEE Main Online Mock Tests NTA Official All Levels Best for simulating actual exam environment

Note: While selecting books, focus on quality rather than quantity. Master a few good books thoroughly rather than superficially studying many books. Always start with NCERT books before moving to advanced reference books.

Online Platforms for JEE Main Preparation

In addition to books, several online platforms offer excellent resources for JEE Main preparation, including video lectures, practice tests, and doubt-solving sessions.

NTA Official Website

NTA Official Website

jeemain.nta.nic.in

The official website for JEE Main provides information about exam dates, application process, syllabus, mock tests, and previous year question papers.

Visit Website
Khan Academy

Khan Academy

khanacademy.org

Offers free video lessons and practice exercises for mathematics and science concepts relevant to JEE Main preparation.

Visit Website
Unacademy

Unacademy

unacademy.com

Provides comprehensive JEE Main preparation with live classes, study material, and mock tests from experienced educators.

Visit Website
Byju's

Byju’s

byjus.com

Offers JEE Main preparation with interactive video lessons, adaptive learning, and personalized mentoring.

Visit Website
Vedantu

Vedantu

vedantu.com

Provides live online classes, study material, and mock tests for JEE Main with interactive teaching methodology.

Visit Website
Toppr

Toppr

toppr.com

Offers personalized learning with adaptive practice, mock tests, and doubt solving for JEE Main aspirants.

Visit Website

JEE Main Study Plan

A well-structured study plan is essential for effective preparation. Here’s a comprehensive study plan that covers the entire syllabus systematically.

Year-Long Plan
6-Month Plan
3-Month Plan
Last Month Strategy

Year-Long Study Plan

Phase 1: Foundation Building (Months 1-4)

Focus: Complete NCERT syllabus for Class 11 and 12

Strategy: Study all three subjects simultaneously. Devote 3-4 hours daily to self-study in addition to coaching classes. Focus on understanding concepts rather than memorization.

Target: Complete 70% of syllabus with basic problem-solving ability

Phase 2: Advanced Learning (Months 5-8)

Focus: Reference books and advanced problem solving

Strategy: Start solving problems from advanced books. Join test series to evaluate preparation. Identify and work on weak areas.

Target: Complete 100% syllabus with moderate to advanced problem-solving skills

Phase 3: Revision & Mock Tests (Months 9-12)

Focus: Revision and full-length mock tests

Strategy: Take 2-3 full tests per week. Analyze performance after each test. Revise formulas and concepts regularly.

Target: Achieve consistent scores above 200 in mock tests

6-Month Intensive Study Plan

Month 1-2: Rapid Syllabus Coverage

Daily Target: 6-8 hours of focused study

Strategy: Cover 2-3 topics from each subject weekly. Focus on high-weightage topics first. Solve basic problems alongside concept learning.

Target: Complete 50% of syllabus with basic understanding

Month 3-4: Problem Solving Practice

Daily Target: 4-5 hours concept study + 3-4 hours problem solving

Strategy: Complete remaining syllabus. Start solving moderate to difficult problems. Take topic-wise tests regularly.

Target: Complete 100% syllabus with problem-solving practice

Month 5-6: Revision & Mock Tests

Daily Target: 2-3 hours revision + 1 full mock test every alternate day

Strategy: Intensive revision of all topics. Focus on weak areas identified through mock tests. Develop time management strategies.

Target: Achieve scores above 180 consistently in mock tests

Last Month Preparation Strategy

Week 1-2: Intensive Revision

Focus: Formulas, concepts, and short notes revision

Strategy: Revise 2-3 topics from each subject daily. Solve 1-2 previous year papers. Focus on high-scoring topics.

Target: Refresh all important concepts and formulas

Week 3: Mock Test Analysis

Focus: Test-taking strategy and time management

Strategy: Take 4-5 full-length mock tests. Analyze each test thoroughly. Work on improving speed and accuracy.

Target: Identify and rectify recurring mistakes

Week 4: Final Preparation

Focus: Confidence building and stress management

Strategy: Light revision only. Avoid learning new topics. Focus on health and well-being. Familiarize with exam center and procedures.

Target: Peak mental and physical condition for exam day

Important: During the last month, avoid comparing your preparation with others. Trust your preparation and stay confident. Get adequate sleep and maintain a positive mindset.

JEE Main Form Filling Assistance Service

Struggling with the JEE Main application process? Our experts are here to help you complete your form accurately and efficiently.

Step 1: Contact Us

Reach out to us via WhatsApp to initiate the form filling assistance process.

Step 2: Provide Details

Share your basic information and required documents with our expert team.

Step 3: Make Payment

Pay the nominal service fee through our secure payment gateway.

Step 4: Form Submission

Our experts will fill and submit your form accurately on your behalf.

Step 5: Confirmation

Receive confirmation and application details after successful submission.

Contact Us on WhatsApp

Note: Our team typically completes the form filling process within 1 hour. However, we recommend availing our services at least 48 hours before the final deadline to avoid any last-minute technical issues. Please keep your phone active during the process for smooth communication.

By using our services, you agree to our Terms and Conditions.

Ready to Ace JEE Main?

Get comprehensive guidance, expert tips, and professional form filling assistance to maximize your chances of success.

Leave a Reply

Your email address will not be published. Required fields are marked *